QD Double Girder Hanger Bridge Crane /Overhead Crane 100 Ton
1.The brife description of QD double girder hanger bridge crane/overhead crane 100 ton
3.Span:up to 60m
The QD double girder hanger bridge crane/overhead crane 100 ton is composed of main beam, end carriage, electric hoist(or you can
choose chain block), electric power transmission device and
operation room(as your demand). QD double girder hanger bridge crane/overhead crane 100 ton is usually used indoors, such as workshop, plant, stockyard, etc.
to lift goods. It is prohibited to use the equipment in the
combustible, explosive or corrosive environment.
RE the control,There are three control method,Pendent
line(included); Wireless remote control,Operation room
And the operational room which has open model and closed model and
can be installed on left or right side according to the practical
situation. And the direction of entering has two ways, sideway
enterance and end surface enterance, in order to satisfy the users'
choice in different conditions.
The main constituent parts of QD double girder hanger bridge crane/overhead crane 100 ton
|1.||Loss of phase / voltage protection||When the voltage/phase is too low, the electricity will disconnect|
|2.||Over Voltage, over current protection||When the voltage/phase is too big, the electricity will disconnect|
|3.||Overload Limit Switch||When the lift capacity is more than the max rated lift capacity,
the electricity will disconnect, crane will stop work|
|4.||Weight limit||Supervise the decrease of hook. There is a limit height. The hook
cannot fall any more if reach this limit|
|5.||Fire limit||Supervise the up and down limit position of Hook. Avoid the over
increase and over decrease, protect hoist|
|6.||Crane Travel Limit Switch||Supervise the travel of crane, and stop crane travel more than
rated travel distance. Keep Safe|